| ZI, RUE 3 | Tel | :+32 71.91.97.60 | |
| 6040 JUMET (BELGIUM) | Fax | :+32 71.91.96.71 | |
| Sales Contact | : Mrs Myriam DURANT | ||
| Export Manager | : Mr Pascal THOMAS | ||
|
|
|
|
|
||||||||||||||||||||
|
||||||
| Question : | What is the maximum stud length which can be welded with the standard gun and accessories. | |||||
| Answer :. | For Threaded, un-threaded and internally threaded studs : For insulation pins : |
Length : 40 mm maximum with standard chuck. Length : 100 mm maximum with standard chuck. |
||||
| Question : | May I weld studs longer than 40 mm ? | |||||
| Answer :. | Yes, you just have to use an extension adaptor for each 16 mm step or you must use longer legs. | |||||
| Question : | May I weld insulation pins longer than 100 mm ? | |||||
| Answer :. | Yes, but the standard gun does not
work, you must use The Extension Leg
Assembly which allows the welding of longer CD nails or use the CONTACT C2 gun. Contact our Technical Support Center. |
|||||
| Question : | Can I use a template for positioning the studs ? | |||||
| Answer :. | Yes, use the 30 mm template tool adaptor. Also available, other diameters supplied in order to fit existing templates. | |||||
| Question : | Can I weld insulation Cup Head Pins ? | |||||
| Answer :. | Yes, use the required gun and the required chuck for Cup Head Pin. Contact our Technical Support Center. | |||||
| Question : | Can I weld different stud and base material together ? | |||||
| Answer : | Yes, check the Weldability of materials. | |||||
| Question : | Can I weld close to an upright ? | |||||
| Answer : . | Yes, use the offset chuck attachment or use a narrow diameter nose assembly. | |||||
| Question : | Can I reduce the noise during the welding process ? | |||||
| Answer : . | Yes, a fully enclosed nose cone reduces noise to a minimum. | |||||
|
||||||
