| ZI, RUE 3 | Tel | :+32 71.91.97.60 | |
| 6040 JUMET (BELGIUM) | Fax | :+32 71.91.96.71 | |
| Sales Contact | : Mrs Myriam DURANT | ||
| Export Manager | : Mr Pascal THOMAS | ||
|
|
|
|
|
||||||||||||||||||||
NOMARK 8 Frequently Asked Questions |
||||
| Question : | What is the maximum stud length which can be welded with the standard gun and accessories. | |||
| Answer :. | For Threaded, un-threaded, internally threaded studs and insulation pins : Length = 100 mm maximum with standard chuck. | |||
| Question : | May I weld studs or pins longer than 100 mm ? | |||
| Answer :. | Yes, you just have to use a longer leg and if needed a center ring. | |||
| Question : | Can I use a template for positioning the studs ? | |||
| Answer :. | Yes, use the template tool adaptor. | |||
| Question : | Can I weld insulation Cup Head Pins ? | |||
| Answer :. | Yes, use the required gun and the required chuck for Cup Head Pin. Contact our Technical Support Center. | |||
| Question : | Can I weld different stud and base material together? | |||
| Answer : | Yes, check the Weldability of materials chart. | |||
| Question : | Can I weld close to an upright ? | |||
| Answer :. | Yes, use the offset chuck attachment with the standard chucks. | |||
| Question : | Can I use the NOMARK 66 chucks with the NOMARK 8 gun ? | |||
| Answer :. | Yes, use the chuck adaptor. | |||
 |
|
|||