THOMAS Welding Systems SA
ZONE INDUSTRIELLE, 3EME RUE Tél : +32 71.91.97.60
B. 6040 JUMET (BELGIUM) Fax : +32 71.91.96.71
Sales Contact : Email
For information  : Fill-in a form BE  FR  LU 
 
NOMARK 65 / 99 / 132: Capacitors discharge pins & studs welders
  • This new line of Microprocessor controlled Capacitor Discharge stud welding equipments incorporates the latest solid state technology into a compact and rugged CD Stud Welder
  • This unit has the capacity to weld studs ranging from 3 mm through 8 mm (10 mm) full flanged studs and pins (including cupped head pins)
  • The NOMARK 65 or NOMARK 99 meets the highest requirements due to operating convenience, precise process times, optimal functional reliability, lightweight and easily portable, compact design, absolute safety (Safety Shutdown) and Low cost
  • The monitoring of all functions is clearly displayed by LED on the front panel
  • Thermostatically controlled cooling fan in all models for increased efficiency

NOMARK 65 / 99 / 132 :Capacitors Discharge studs welder - CONTACT Method

Unit NOMARK 65 NOMARK 99 NOMARK 132
Welding range : M 3 - M 8 M 3 - M 8  (M 10) M 3 - M 10
Weldable Materials : Steel, Stainless Steel Steel, Stainless Steel Steel, Stainless Steel
Welding process : "Contact" "Contact" "Contact"
Capacitance : 66.000 µF 99.000 µF 132.000 µF
Charging : 50-200 V  (Dial‐down) 50-200 V  (Dial‐down) 40-200 V  (Dial‐down)
Digital Voltmeter : Yes Yes Yes
Duty cycle : up till 10 studs/min up till 10 studs/min up till 5 studs/min
Energy : 1.320 Ws 1.980 Ws 2.640 Ws
Mains supply : 230 V - 50/60 Hz - 10 AT 230 V - 50/60 Hz - 10 AT 230 V - 50/60 Hz - 10 AT
Size (w x h x l) : 165 x 250 x 380 mm 165 x 250 x 380 mm 165 x 250 x 380 mm
Weight : 12,5 Kg 13 Kg 14,5 Kg
 
CHP stud welding guns for Cup Head Pins
  • The small and very handy CHP gun is a special innovative welding gun for directly welding Cup Head Pin through heat insulating jackets in a single operation

CHP Gun for welding Cup Head Pin through heat insulating jackets

Gun  CHP  
Welding range : Cup Head Pins  
CHP Length : Any  
Welding process : Contact  
Front plate : Ø 80 mm  
Settings : Infinitely adjustable  
Kit for CHP-ISOL
(for aluminum faced insulation)
: Included  
Cables length : 10 meters (highly flexible)  
Weight : 0,9 Kg. (without cable)  
 
CHP stud welding guns for Cup Head Pins
  • The small and very handy C0CHP gun, based  on C0 gun, is a special innovative welding gun for directly welding Cup Head Pin through heat insulating jackets in a single operation

C0-CHP Gun for welding Cup Head Pin through heat insulating jackets

Gun  C0-CHP  
Welding range : Cup Head Pins  
CHP Length : Any  
Welding process : Contact  
Front plate : No  
Settings : Infinitely adjustable  
Kit for CHP-ISOL
(for aluminum faced insulation)
: Optional  
Cables length : 8 meters (highly flexible)  
Weight : 0,7 Kg. (without cable)