| ZONE INDUSTRIELLE, RUE 3 |
| B. 6040 JUMET (BELGIUM) |
| Tel | :+32 71.91.97.60 |
| Fax | :+32 71.91.96.71 |
| For information: | Fill-in a form |
| Sales Contact | : Mrs Myriam DURANT |
| Export Manager | : Mr Pascal THOMAS |
|
|
|
|
|
|
Capacitor discharge stud welding equipment : NOMARK 8 |
|||
| The NOMARK 8 is a heavy duty portable
universal generator for capacitor discharge studs with tip ignition. The
NOMARK 8 offers you the infinitely regulation of charging voltage
and the control switch for its variable capacitance. This equipment
is designed for a wide range of users and gives you precise settings and
highly reliably reproducible welds even on galvanized sheet of metal or aluminum
plate with the same equipment. Light, strong, secure, portable, it can
used everywhere. Its features are your benefits.
|
|||
 |
Welding range | : | M3 - M8 in Steel and Stainless Steel M3 - M6 in Aluminum and Brass (M8 in Aluminum and Brass after welding tests) |
| Welding source | : | Capacitor battery | |
| Capacitance | : | 36.000 up till 150.000 m F | |
| Charging Voltage | : | 45 - 200 V | |
| Welding time | : | 0,002 - 0,005 sec. | |
| Duty cycle | : | up till 40 studs / min. | |
| Incoming power | : | 230 V - 50 / 60 Hz - 10 AT | |
| Size (w x h x l) | : | 320 x 250 x 600 mm | |
| Protection | : | IP 21 | |
| Insulation Class | : | 1 | |
| Weight | : | 35 Kg. | |
Optional |
: | LCD display for charging voltage control | |
| Capacitor selector | |||
| The light duty C2 CONTACT welding gun is a compact, lightweight tool made of high strength, impact resistant, glass fiber reinforced polycarbonate. Welds any length CD stud with a diameter range of
2 mm through 8 mm. A variable plunge rate adjuster will allow the operator to alter the hand tool for slow welds onto coated steels and fast welds onto Aluminum. Adapters are available to make the gun interchangeable with most CD stud welding collets and chucks. |
|||
|
|
Welding range | : | M 3 to M 8 |
| Stud Length | : | Any length | |
| Nail length | : | Any length | |
| Welding process | : | C2 : CONTACT | |
| Spring settings (for C1) | : | Infinitely adjustable | |
| Cables length | : | Gun C2 : 7 meters (highly flexible) | |
| Cables Section | : | 35 mm2 | |
| Protection | : | IP 2x | |
| Weight | : | 0,9 Kg. (without cable) | |
|
Accessories |
Template Tube Ø 30 mm | ||
| Chuck Offset | |||
| The super lightweight C1 CONTACT welding gun, but rugged, ergonomic design minimizes operator fatigue while maximizing productivity. Reliable mechanical
contact system minimizes gun weight. The unique mechanical mechanism allows for the precise locating of the stud prior to
welding the stud. Infinitely adjustable spring pressure range provides the precision set-up required for difficult applications. A variable plunge rate adjuster will allow the operator to alter the hand tool for slow welds onto coated steels and fast welds onto Aluminum. Gun configured with tripod legs allow the welding of studs up to 40 mm long. Longer legs or extension kit available for longer studs. |
|||
|
|
Welding range | : | M 3 to M 8 |
| Stud Length | : | 6 to 40 mm | |
| Nail length | : | 10 à 100 mm | |
| Welding process | : | C1 : CONTACT | |
| Spring settings (for C1) | : | Infinitely adjustable | |
| Cables length | : | Gun C1 : 5 meters (highly flexible) | |
| Cables Section | : | 25 mm2 | |
| Protection | : | IP 2x | |
| Weight | : | 0,7 Kg. (without cable) | |
|
Accessories |
Template Tube Ø 30 mm | ||
| Extension Kit for studs longer than 40 mmm | |||
| Silence Tube Ø 35 mm | |||
| Chuck Offset | |||
| Tube for Template Ø 20, 26 et 30 mm. | |||
| Tool for long studs or nails. | |||
 |
|||
