Capacitor discharge stud welding equipment for cup head pin.
The NOMARK 88 is designed for a wide range of users ... OEM, light construction, insulation installers, ship builders, HVAC and sheet metal contractors.This new line of stud welding equipments meets the highest requirements due to operating convenience, low weight, high efficiency, compact design and absolute safety. 
Inverter power modules replace traditional heavy transformer rectifiers, are more efficient to use and faster to charge.
The monitoring of all functions is clearly displayed by LED on the front panel. The short charging cycles increase productivity.

With a CPH gun, in a single operation, insulating pins and clips are rapidly welded through heat-insulating jackets.
It is for anyone needing a cup head pin welding capability.

NOMARK 88
	Weldable studs:	With CHP gun : Cup Head Pin With GAP or CONTACT gun : M3 - M8 in Steel and Stainless Steel M3 - M6 in Aluminium and Brass (M8 in Aluminium and Brass after welding tests)
	Welding source:	Condensators battery
	Welding process :	GAP and CONTACT
	Capacitance :	90.000 m F
	Charging Voltage:	50 - 200 V   ( UP and DOWN )
	Welding time :	0,001 - 0,003 sec.
	Duty cycle:	up till 25 studs / min.
	Output  power :	1.320 Ws
	Incoming power:	230 V - 50 / 60 Hz - 10 AT
	Size (w x h x l) :	195 x 265 x 400 mm
	Protection:	IP 23
	Insulation Class:	1
	Weigth :	13 Kg.
The small and very handy CHP-1 gun is a special innovative welding gun for directly welding Cup Head Pin through heat insulating jackets in a single operation.
	Weldable studs:	Cup Head Pin
	Welding process :	CONTACT
	Welding cable length	10 meters highly flexible
	Base plate	Ø 80 mm